Epson OPOS

EpsonNet Config V4 (for network connection only)

Normally you might use this from your own machine but in this case I've installed it on the POS. This is a program that scans for Epson devices on the network and allows you to configure the printer itself. For example you can change weather the printer has a static IP address or gets one from a DHCP server.

• Download path

  • https://download.epson-biz.com/modules/pos/index.php?page=single_soft&cid=6047&scat=43&pcat=3

• Installer

  • c:\temp\EpsonNetConfig_v4_9_5.exe

• Application path

  • C:\Program Files (x86)\EpsonNet\EpsonNet Config V4\ENConfig.exe

Epson OPOS ADK (installer needed on every POS)

Installs OPOS drivers that provides a uniformed communication layer between POS application (Centara) and an OPOS compatible device (for example Epson TMT88). Also installs a configuration utility to set things up and diagnose.

Fetching the program

• Download path

  • https://download.epson-biz.com/modules/pos/index.php?page=single_soft&cid=6239&pcat=3&pid=36

• Self extracting application

  • c:\temp\ADK300ER3.exe

• Unzipped path

  • C:\Temp\EpsonADK\OPOSADK\ADK300ER3\

• Installer

  • C:\Temp\EpsonADK\OPOSADK\ADK300ER3\Disk1\EPSON_OPOS_ADK_V3.00ER3.exe

• Full documentation

  • C:\Temp\EpsonADK\OPOSADK\ADK300ER3\Disk1\Documentation.zip

• Application path

  • C:\Program Files (x86)\OPOS\Epson3\SetupPOS.exe

Configure devices on POS

• Run SetupPOS.exe

• Add new PosPrinter

  • Select device name

    • TM-T88V (as an example)

  • Provide Logical Device Name LDN for Centara to communicate with

    • OPOSPRN1

  • Make new or select existing port

    • NET xxx.xxx.xxx.xxx

  • Check health interactively.

• Add new Drawer

  • Select device name: Standard

  • Select detailed model

    • StandardS (when connecting via serial port)

    • StandardU (when connecting via USB port)

    • StandardE (when connecting via ethernet)

  • Provide Logical Device Name LDN for Centara to communicate with

    • OPOSDRW1

  • Select printer type that drawer connects to

    • TM-T88V (as an example)

  • Select current printer as master device

  • Check health interactively

In some rare cases, if the drawer will not open; in SetupPOS.exe try to go to Communication settings of the drawer instance, and click Device Specific Settings. Change Open Status Phase from Low to High.